200A ACDC TIG Arc PULSE WELDERS 50A Plasma Cutter 200amp

High Frequency and Contact Start:
High Frequency DC Claret cuts thicker abstracts than accepted DC claret cutters. This 50amp Inverter Claret cutter cuts metal like butter. High Frequency Claret cuts faster with beneath baloney in your metal.

Welders Specs:
TIG and Arc Welders
* 200 Amps Tig PULSE Welders: Duty Cycle 60% at 180 Amps
* ARC and 100% at 95 Amps ARC. Gas Flow: 2-5 L/Minute. It can bond all stainless steel. 150 Amps Arc Welder: Duty Cycle 60% at 160 Amps and 100% at 90 Amps.
* AC/DC - The welders will bond aluminum. This welder will bond in PULSE mode.
Internal High Speed Cooling Fan to Regulate Temperature. Unit has congenital in Thermal and Overload Protection
Model: EV-Super200P
Category: AC & DC Pulse Tig Arc (MMA)
Purpose: AC & DC PULSE CUT TIG ARC (MMA)
Price: $1400.00
Technology:
Mosfet Technology
Operating Voltage:
208/220vac 50/60HZ Input Single Phase 1PH
50amp cut draws 22.7A at 5KVA
40amp cut draws 17.6A at 3.8KVA
230V No Load Voltage
Plasma Cutting Specs:
NOW COMES WITH PILOT ARC TORCH
3" Per minute @ 1.0" Animate (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel
* 50 Amp Claret cutter: Duty Cycle 60% at 50 Amp and 100% at 30 Amps. 0.5 inches apple-pie cut with 7.2 inches per minutes; 3/4 inches severance cut with 3.1 inches per minute. Rated Output Current is 40Amps beneath both AC 110V and 220V. Works in both 50 and 60 Hz with operating air burden as 65 psi @ 3 cfm.


What is Included?
* Main Unit
* Pilot Arc Cutting Torch
* TIG Torch
* Stick Holder
* Earth Clamp
* Air Regulator with Bracket
* Air Hose
* Foot Pedal
* Argon Regulator
* Consumables: 3 allotment tips, 3 allotment electrodes, 1 allotment gas diffuser, 1 allotment absorber cups